亚洲欧美一区二区三区蜜芽_国产高清看片日韩欧美久久_欧美国产亚洲另类区_99精品在免费线视频_伊人精品视频

Environmental requirements

The location of the machine tool should be far away from the source of vibration, direct sunlight and thermal radiation, and humidity and airflow should be avoided. If there is a vibration source near the machine tool, an anti-vibration trench should be set around the machine tool. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, and cause poor contact of electronic components, failures, and affect the reliability of the machine tool.

Power requirements

Generally, CNC lathes are installed in machining workshops, which not only have large environmental temperature changes and poor use conditions, but also a large number of various electromechanical equipment, resulting in large fluctuations in the power grid. Therefore, the location where the CNC lathe is installed requires strict control of the power supply voltage. The fluctuation of the power supply voltage must be within the allowable range and remain relatively stable. Otherwise it will affect the normal operation of the CNC system.

Temperature condition

The ambient temperature of the CNC lathe is less than 30 degrees Celsius, and the relative temperature is less than 80%. Generally speaking, an exhaust fan or air cooler is arranged inside the numerical control electric control box to keep the electronic components, especially the core processor working temperature constant or the temperature difference is small. Excessive temperature and humidity will reduce the life of control system components and cause more failures. The increase in temperature and humidity and the increase in dust will cause adhesion on the integrated circuit board and cause short circuits.

Standard use

When using the machine tool, the user is not allowed to change the parameters set by the manufacturer in the control system at will. The setting of these parameters is directly related to the dynamic characteristics of each part of the machine tool. Only the value of the gap compensation parameter can be adjusted according to the actual situation. The user cannot replace the machine tool accessories at will, such as using a hydraulic chuck that exceeds the specification. When setting up accessories, the manufacturer fully considers the matching of various link parameters. Blind replacement causes mismatch of various link parameters, and even causes unexpected accidents. The pressure of the hydraulic chuck, hydraulic tool rest, hydraulic tailstock, and hydraulic cylinder should be within the allowable stress range, and any increase is not allowed.